menu.lst de mi kira

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0



## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 15

#hiddenmenu
# Hides the menu by default (press ESC to see the menu)

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b9516b1a-8a3d-49de-90d7-d9e1eb030f4d ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##
#############################LINPUS###################################

#indica el lugar de orden de booteo
default=0
#indica el tiempo en que estará visible el menú de arranque
timeout=15
#indica una imagen para el splash del menú
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
#indica si el menú será visible o no
#hiddenmenu

title Linpus Linux Lite
rootnoverify (hd0,0)
kernel /boot/bzImage changes=/dev/hdc1 root=/dev/ram0 rw max_loop=255 init=linuxrc selinux=0 vga=0x311 splash=silent quiet loglevel=1 console=tty1 load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=14000 from=/dev/hdc1 acpi=force ide0=noprobe ide2=noprobe ide3=noprobe lang=es
initrd /boot/initrd.gz

title Linpus Linux Lite(rescue)
rootnoverify (hd0,0)
kernel /boot/bzImage changes=/dev/hdc1 root=/dev/ram0 rw max_loop=255 init=linuxrc selinux=0 vga=0x311 splash=silent quiet loglevel=1 console=tty1 load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=14000 from=/dev/hdc1 acpi=force rescue lang=es
initrd /boot/initrd.gz

############################ LINPUS FINAL ##################################


##Ubuntu en Kira##
title Kernel para el Kira
root (hd0,1)
kernel /boot/bzImage root=/dev/hdc2 ro locale=es_ES lang=es
############################################################################


title Ubuntu 8.04.1, kernel 2.6.24-19-generic
root (hd0,1)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=b9516b1a-8a3d-49de-90d7-d9e1eb030f4d ro quiet splash
initrd /boot/initrd.img-2.6.24-19-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=b9516b1a-8a3d-49de-90d7-d9e1eb030f4d ro single
initrd /boot/initrd.img-2.6.24-19-generic

title Ubuntu 8.04.1, memtest86+
root (hd0,1)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST